QuietCool QC48B2 Owner's Manual download pdf (Page 3)

File this owner’s manual in a safe place for future reference. It contains operating procedures – maintenance procedures –

trouble shooting guide – replacement parts guide – order form – and contact information. You will need this!

Warnings and Cautions

Read before operating QuietCool Portable Evaporative Cooler

ELECTRICAL

WARNING Do not use a 3 prong to 2 prong adapter on the electrical power cord. Use 12 gauge extension cord only.

WARNING Do not remove the grounding lug from the electrical power cord plug.

Use only 3 prong, grounded receptacles.

WARNING Disconnect the QuietCool Portable Evaporative Cooler from your electrical power source before performing

any service action.

WARNING Your QuietCool unit must be plugged into a fused or circuit breaker protected 20 Amp, 120 Volt, 60 Hz circuit

– unless specifically manufactured for another voltage / frequency configuration. See manufacturer’s label on

cooler. A ground fault circuit interrupter protected circuit is strongly recommended.

WARNING Check your units electric power cord for insulation breaks, cracks or fraying. If any of these conditions are

found DO NOT USE. See your distributor for immediate service replacement parts.

WARNING Some electric motors require periodic oiling. Check your model for oil fill holes. A couple drops of light oil

per year normally will be sufficient. Heavy usage may require additional oil.

WARNING To reduce the risk of fire or electrical shock, DO NOT USE with any solid-state speed control device.

WARNING To reduce the risk of electrical shock or injury to persons, DO NOT USE cooler in a window.

WATER

WARNING Do not connect your QuietCool Portable Evaporative Cooler to any water source where water pressure exceeds

60 p.s.i. If your water source is above 60 p.s.i. you must use a pressure regulator (which can be found

at your local hardware store).

1 2 3 4 5 6 7 8 ... 14 15

No comments

QuietCool QC48B2 Owner's Manual Page 3